Max Knives FP1801-133 — 440C stone wash Bowie, numbered piece No. 133
- Blade length150mm
- Blade material440C steel
- Overall length260mm
- Handle materialG10
Numbered piece No. 133 of the FP1801 Bowie: 5 mm at the spine, the thickest steel in the whole Fred Perrin family, behind a 150 mm 440C stone wash blade set on a G10 handle.
Overview
This Bowie carries the number 133. It follows the FP1801 designed by Fred Perrin without a single change: 260 mm overall, a 150 mm 440C blade with a plain edge, a 95 mm G10 handle, stone wash finish, kydex sheath with a tecklock mount. What catches the eye in profile is the spine: a full 5 mm, the thickest measurement recorded across the Fred Perrin knives produced by Max Knives. The number identifies this one piece and will not appear on any other.
Five millimetres of spine, and what that means
Five millimetres on a blade is not a decorative figure: it is the measurement that governs stiffness. A blade's resistance to bending rises far faster than its thickness, so a 5 mm spine is not merely a little stiffer than a 3 mm one — it belongs to another order of magnitude. In practice the blade does not flex under pressure, the point stays on the axis, and the energy put into the movement goes into the material rather than into the steel bending. That same measurement gives the knife its inertia, so it carries itself down through wood or dense cardboard.
Technical specifications
Fixed blade, numbered piece No. 133. 440C steel, Bowie shape, plain edge, stone wash finish. Blade thickness 5 mm. Blade 150 mm, handle 95 mm, overall length 260 mm. G10 handle. Kydex sheath with multi-position tecklock attachment included. A model designed by Fred Perrin and produced by Max Knives, offered here as a numbered limited edition.
Care
A blade of this build holds moisture in the hollow of the clip point: dry it completely before returning it to the sheath. 440C stands up well to corrosion, but a rinse under clean water is still worth it after working on acidic or salty material. A microfibre cloth is enough for the stone wash finish; leave abrasives aside, as they would lighten its grain. The kydex sheath rinses the same way and dries in open air with the fittings loosened.
Legal notice for international buyers. Carrying it in public without a legitimate reason is an offence in France and in most European countries. It is the buyer's responsibility to check the law that applies where the order is delivered before purchasing.
-
Blade material440C steel
-
Edge typePlain edge
-
Handle materialG10
-
Blade shapeBowie
-
Blade length150mm
-
Handle length95mm
-
Overall length260mm
-
Blade thickness5mm
-
Blade finishStonewash
-
SheathKydex sheath included
-
Blade length (range)Over 130 mm
-
Overall length (range)Over 250 mm
-
Blade thickness (range)Over 4 mm
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent