Max Knives PBF-6 — Tanto Butterfly Knife, D2 Steel, Dished-Disc Handle
- Blade length107mm
- Blade materialD2 tool steel
- Overall length245mm
- Handle materialAnodised aluminium
- Weight118g
The tanto of the dished-disc handle: the PBF-6 takes the milled circular hollows of the PBF-5 and sets against them a short, reinforced two-faceted point. A 107 mm blade in D2 tool steel, 245 mm open.
Overview
An even number on the grid, therefore a tanto: the PBF-6 pairs the dished-disc handle with a 107 mm blade in D2 tool steel. The circular hollows milled into the black anodized aluminium run along both arms, which swing on their two axes to enclose or release the blade. Integral construction, two exposed pivot screws, light satin blade finish and D2 marking at the ricasso. 142 mm closed, 245 mm open, the same dimensions as its twin the PBF-5.
The tanto: a short tip, two facets
On the PBF-6, the edge stays straight over most of the blade, then breaks at a clean angle. From that angle a second, shorter facet rises towards a thick, reinforced point. This is precisely what separates the tanto from the clip point of the odd numbers, whose spine instead drops away in a concave curve to a fine, low tip. The practical consequence at the bench: a tanto is touched up in two passes, each facet having its own orientation on the stone.
Technical specifications
Tanto blade in D2 tool steel, 107 mm long, plain edge and 3 mm thick at the spine, light satin finish, D2 marking at the ricasso. Handle in black anodized aluminium, integral construction, hollowed with machined discs, 12.50 mm thick, two exposed pivot screws. 142 mm once closed, 245 mm deployed.
Care
Clean the dished discs with a dry cloth, pressing a fingertip into each hollow. The D2 tool steel blade is dried and then lightly oiled after handling. The two pivots call for a drop of light oil and a check on the tightness of their screws. When sharpening, work the long straight edge first, then the tip facet, without trying to join the two in a single movement.
Legal notice for international buyers. Age-restricted item (18+). In France this is a Category D item: legal to sell but reserved for adults, with age verification at checkout. Carrying it in public without a legitimate reason is an offence in France and in most European countries. It is the buyer's responsibility to check the law that applies where the order is delivered before purchasing.
-
Blade materialD2 tool steel
-
Edge typePlain edge
-
Handle materialAnodised aluminium
-
Blade shapeTanto
-
Blade length107mm
-
Handle length142mm
-
Overall length245mm
-
Blade thickness3mm
-
Weapon categoryD
-
SaleNot for sale to minors
-
Weight118g
-
Blade length (range)100 to 130 mm
-
Overall length (range)200 to 250 mm
-
Blade thickness (range)3 to 4 mm
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent